Products for Volvo 240 series

 

Ingen bildebeskrivelse er tilgjengelig.
Ingen bildebeskrivelse er tilgjengelig.

 

Volvo 240 10,25» andorid unit mounting bracket.

Price: 1350 NOK

Fits Joying 10,25» android singledin unit. Singledin hardware din unit needs to be mounted somewhere behind, as this bracket only holds the screen. The din unit transfers data to the screen through ei 30cm cable. Or you buy the 1meter extention cable on their page and mount the din unit somewhere else down or on the side of the dashboard.

Player must be bought separate at: www.joyingauto.com

https://www.joyingauto.com/single-din-car-radio/10-25-inch-single-din.html

 

 

Ingen bildebeskrivelse er tilgjengelig.
Ingen bildebeskrivelse er tilgjengelig. Ingen bildebeskrivelse er tilgjengelig.

Volvo 240 Rally Gauge pod

Price: 2800 NOK (previously 3350NOK)

Fits all 52mm gauges or can be altere don your demand if you need some other stuff mounted in it.

VDO cocpit and original Volvo gauges fits flush with the front facia.
The bigger Autogauge instrument pictured fits also, but sits outside the face and not flush.

Fits gauges about 90+mm deep.

Comes with two wingnuts and screws to secure it to the center speaker hole on 240 dashboards.

If your dashboard is without speakerhole in the midle then you need to drill some kind of hole for the wiring.

Fits All 240, firstgeneration dashboard need the bracket below to look good, but works without also.

Price of the unit is at writing time about 1\3rd of the original one, and the only copy of the factory one excisting on the market.

Ingen bildebeskrivelse er tilgjengelig.
Ingen bildebeskrivelse er tilgjengelig.
Ingen bildebeskrivelse er tilgjengelig.
Ingen bildebeskrivelse er tilgjengelig.
Ingen bildebeskrivelse er tilgjengelig.

Volvo 240 Rally Gauge pod adaptor for 1st gen 240 dashboards

Price: 250NOK
No extra shipping if bought with the Gauge pod.

Makes the gaugepod work with the first generation dashboard. Redesigned the adaptor so it is similar to the gauge pod front. Top picture from a prototype test, rest from customer.

Due to info from another customer the dash profile might deviate from the pictured one. Might be a gap, might not be under the adaptor. If wanted, the gaugepod can be shipped, you measure the lenght down to the dashboard from the bottom edge of the pod and then i make sure it should fit, sending you a 3d file to get printed your self localy. That would be the safest to make sure fitment of the adaptor is the best.






Ingen bildebeskrivelse er tilgjengelig.

Volvo 240 Haltech IC-7 bracket

Price: 1500NOK with a 0,6 nozzle, more if you want finer finish

Main instrument bracket to fit the Haltech IC-7 unit.
Replaces the main instrument completely. Fits bolt on without any modifications to your dashboard.

The sides of the instrument do have room for some extra buttons or indicator lamps if you need. Message me if needed and i can make it into the modell before printing it.

IC-7 unit not included and need to be bought by a separate dealer. I do not sell Haltech sadly.

Here pictured with my full lenght Double din bracket with two holes for stock gauges. Looks awesome.



Ingen bildebeskrivelse er tilgjengelig.
Ingen bildebeskrivelse er tilgjengelig.

Volvo 240 Holley EFI 7inch bracket

Made for Holley Partn: 553-106

Price: 1500NOK with a 0,6 nozzle, more if you want finer finish

Main instrument bracket to fit the Holley EFI 7inch unit.
Replaces the main instrument completely. Fits bolt on without any modifications to your dashboard.

The sides of the instrument do have room for some extra buttons or indicator lamps if you need. Message me if needed and i can make it into the modell before printing it.

Holley EFI unit not included and need to be bought by a separate dealer. I do not sell Haltech sadly.

 



Ingen bildebeskrivelse er tilgjengelig.

Volvo 240 Holley EFI 7-> 3,5 inch bracket

For the main instrument bracket above.
Bracket inside the bracket in other words, if your are planing to upgrade later on from the small one to the bigger one.

Made for Holley Partn: 553-108

Price:

You need the main instrument bracket above to use this bracket inside it.

Holley EFI unit not included and need to be bought by a separate dealer. I do not sell Haltech sadly.

 





Volvo 240 adaptor for old style Rally Instrument

This makes the old type Rally gauge instrument fit into your new type 240 dashboard.

Price: 1800NOK

Weight: aprox 170 grams

Fits straigth in. Gauges not included, only pictured 3D printed adaptorplate.

Instrument panel can be modified to your need if you are going to run certain instrument or dashlogger only, contact me for designing one to your needs.

 

Ingen bildebeskrivelse er tilgjengelig.
Bildet kan inneholde: skjerm Bildet kan inneholde: telefon
Ingen bildebeskrivelse er tilgjengelig.

Et bilde som inneholder utendørs, himmel, tre, gress

Automatisk generert beskrivelse

Volvo 240 Doubledin bracket

Price: 1250 NOK

Weight: aprox 170 grams

Makes installing a double din player in your Volvo 240 easy. Fits in original mountingplaces.

The only modification needed is ofcourse to cut the horisontal split behind so the player can be put there, and blind the ventilation inside.

Comes with hole for spesified ebay AUX outlet, with USB and 3,5mm Jack. Needs to be bought separate on ebay. Not included. Link to buy on ebay will be supplied.

If you do not need the aux you can order the blank cover for it for a small extra charge of 50NOK, more or less the same as the usb\jack plug bougt on ebay separately.

For installing the player you need to have the metal cage that comes with the double din player.
the inside hole measures about 110mm high and 183mm wide






Volvo 240 Double din full facia.

Same as above, just with holes for gauges in the two positions. Allowing the 52mm gauges to show through in the facotry possitions.


Price: 1450NOK

Makes installing a double din player in your Volvo 240 easy. Fits in original mountingplaces.

The only modification needed is ofcourse to cut the horisontal split behind so the player can be put there, and blind the ventilation inside.

Comes with hole for spesified ebay AUX outlet, with USB and 3,5mm Jack. Needs to be bought separate on ebay. Not included. Link to buy on ebay will be supplied.

If you do not need the aux you can order the blank cover for it for a small extra charge of 50NOK, more or less the same as the usb\jack plug bougt on ebay separately.

For installing the player you need to have the metal cage that comes with the double din player.
the inside hole measures about 110mm high and 183mm wide

Volvo 240 1 Din bracket to replace the factory ventilation in the center of your dashboard available.

Price: 700 NOK

Comes with hole for spesified ebay AUX outlet, with USB and 3,5mm Jack. Needs to be bought separate on ebay. Not included. Link to buy on ebay will be supplied.

If you do not need the aux you can order the blank cover for it for a small extra charge of 50NOK, more or less the same as the usb\jack plug bougt on ebay separately.

 

Volvo 240 lower possition gaugeholders available

Price on request.

Fits into the hole in front of the gearstick on 240.

Available as plain flat and angled unit.

 

Volvo 240 S60R Brembo Brake caliper adaptors

Made in 6082 Aluminium.

As of regulations in Norway, these adaptors would be possible to get road legal.

Price for 4 brackets: 2500 NOK (6082 Alu.)
Price for 2 parkingbrake drums: 2500 NOK (Steel)

 

Drums need to be pressed into the S60R\V70R rear brakedisck, that way you can still use factory 240 handbrake.
The other option is to weld S60R + 240 parkinbrake shoes into one unit and make it fit. It also works, but much more work to have it done. Not offering it, only giving an option for you to think about.

 

Not in stock, but when i have enough orders i will have a batch made. Need 5 prepaid orders minimum to have them produced.

Ingen bildebeskrivelse er tilgjengelig. Ingen bildebeskrivelse er tilgjengelig.
Ingen bildebeskrivelse er tilgjengelig.

Volvo 240 Classic spoiler fastening clips

Price:
Discontinued due to the brackets not foolproof.
Have them in aluminum but way to expencive so you would more likely just use some really strong windshield glue to mount your wing.

Used to mount and secure the original Classic spoiler for Volvo 240. might fit different also but not checked.

 

 

Ingen bildebeskrivelse er tilgjengelig.
Ingen bildebeskrivelse er tilgjengelig.Ingen bildebeskrivelse er tilgjengelig.Ingen bildebeskrivelse er tilgjengelig.
Ingen bildebeskrivelse er tilgjengelig.

Volvo 240 R Design Gauge faces

Available and in stock! Email for price

 

Fits ALL types of this generation 240 instrument. Both types of right side instrument in each kit. And both types of Speedoface in each kit.